| 181 |
J. PURDEY & SONS
A 12-BORE SELF-OPENING SIDELOCK EJECTOR GUN, NO. 11570
28-inch replacement barrels by B. E. Chaplin (Gunmakers) Ltd, Winchester, with 2 3/4-inch chambers, about 1/2 and 3/4 choke borings, mid extension, the frame, locks and top lever with fine bouquet and scroll engraving, the fences carved with fleurs-de-lys, 15-inch figured replacement stock, 6lb. 11oz., nitro re-proof, canvas Brady case
S2
The maker confirms that the gun was built in 1884. It was subsequently converted to ejector and the replacement barrels were fitted in 1973.
Sold for £3200
|
details |
 |
| 182 |
J. PURDEY & SONS
A 12-BORE SELF-OPENING SIDELOCK EJECTOR GUN, NO. 25434
28-inch chopper-lump barrels with 2 1/2-inch chambers, about improved cylinder and 3/4 choke borings, the frame, locks and numbered top lever with fine bouquet and scroll engraving, cleaned bright overall, lined cocking indicators, 14 3/4-inch well figured stock with chequered butt plate, 6lb. 4oz., nitro proof, in its earlier maker's oak and leather case, the lid impressed with the name 'W. E. P. Bustard'
S2
The maker confirms that the gun was built as a No.1 gun in 1937 with 28-inch barrels and a 15 1/2-inch stock. A letter from the maker to this effect dated 1975 is included with the gun.
Sold for £5500
|
details |
|
| 183 |
AYA
A 12-BORE NO.2 MODEL SIDELOCK EJECTOR GUN, NO. 562774
28-inch barrels with 2 3/4-inch chambers, about true cylinder and 1/4 choke borings, the frame, hand detachable locks and top lever with fine scroll engraving and retaining much original hardening colour, gold lined cocking indicators, articulated front trigger, rolled edge trigger guard, 14 1/2-inch figured stock, 6lb. 12oz., Spanish nitro proof
S2
Sold for £600
|
details |
|
| 184 |
AYA
A 12-BORE NO.2 MODEL SIDELOCK EJECTOR GUN, NO. 500450
26-inch chopper-lump barrels with 2 3/4-inch chambers, about improved cylinder and 1/2 choke borings, the frame, hand detachable locks and top lever with scroll engraving and retaining almost all of its original hardening colour, gold lined cocking indicators, articulated front trigger, rolled edge trigger guard, 14 3/4-inch figured stock, 6lb. 8oz., Spanish nitro proof, in its pig skin covered case
S2
Country of Origin: Spain/Date of Manufacture: circa 1980
Sold for £800
|
details |
|
| 185 |
AYA
A 12-BORE NO.2 MODEL SIDELOCK EJECTOR GUN, NO. 554426
26-inch barrels with 2 3/4-inch chambers, about 1/4 and 1/2 choke borings, the frame, hand detachable locks and top lever with scroll engraving and retaining virtually all of its original hardening colour, gold lined cocking indicators, articulated front trigger, rolled edge trigger guard, 14 1/2-inch figured stock, 6lb. 8oz., Spanish nitro proof, in its Brady canvas case
S2
Country of Origin: Spain/Date of Manufacture: circa 1982
Sold for £850
|
details |
|
| 186 |
COGSWELL & HARRISON
A 12-BORE "HUNTIC" MODEL ASSISTED OPENING SIDELOCK EJECTOR GUN, NO. 57798
27 1/2-inch barrels with 2 1/2-inch chambers, about improved cylinder and 1/2 choke borings, the frame, locks and top lever with scroll engraving, 14 1/4-inch figured stock, 6lb. 10oz., nitro proof, bores marked
S2
Sold for £450
|
details |
|
| 187 |
J. PURDEY & SONS - WITHDRAWN
A 12-BORE SELF-OPENING SIDELOCK EJECTOR GUN, NO. 21060
30-inch Whitworth steel chopper-lump barrels with 2 1/2-inch chambers, about improved cylinder and 3/4 choke borings, the frame, locks and top lever with fine bouquet and scroll engraving, lined cocking indicators, 14 3/4-inch figured stock with spliced-in comb and rubber recoil pad, 6lb. 14oz., nitro proof, right bore marked, re-jointing recommended, worn overall
S2
The maker confirms that the gun was built in 19??
|
details |
|
| 188 |
STEPHEN GRANT & SON
A 12-BORE SIDE LEVER SIDELOCK EJECTOR GUN, NO. 7252
30-inch Whitworth steel barrels with 2 1/2-inch chambers, about 1/2 choke borings, the frame, bar locks and side lever with fine scroll engraving, fluted fences, 14 1/2-inch highly figured stock including 3/4-inch extension, 6lb. 8oz., nitro proof, right barrel wall thickness slightly below the recommended minimum, leather case with reproduction maker's label
S2
|
details |
|
| 189 |
JAMES WOODWARD & SONS
A 12-BORE SIDELOCK EJECTOR GUN, NO. 5549
29-inch Whitworth steel chopper-lump barrels with 2 1/2-inch chambers, about 1/4 choke borings, the frame, locks and gold numbered top lever with fine scroll engraving, arcaded fences, raised cocking indicators, 15-inch well figured replacement stock, 6lb. 9oz., nitro proof, in its maker's brassbound oak and leather case
S2
The maker confirms that the gun was built in 1901 for Col. C. Martyn as the No.2 gun of a pair with straight hand stocks and no clips.
Sold for £3200
|
details |
|
| 190 |
J. WOODWARD & SONS
A 12-BORE SIDELOCK EJECTOR GUN, NO. 5465
29-inch Whitworth steel chopper-lump barrels with 2 1/2-inch chambers, about improved cylinder and 1/4 choke borings, mid extension, the frame, locks and gold numbered top lever with fine scroll engraving and retaining traces of original hardening colour, arcaded fences, raised gold lined cocking indicator, 14 1/2-inch highly figured stock with Prince of Wales grip, 6lb. 12oz., nitro proof, re-jointing recommended, right ejector at fault
S2
The maker confirms that the gun was built in 1900 for Col. Hon. Garthorne Hardy as the No.2 gun of a pair.
Sold for £4500
|
details |
|
| 191 |
HOLLAND & HOLLAND
A FINE 12-BORE "ROYAL" MODEL SIDELOCK EJECTOR GUN, NO. 23856
30-inch barrels with 2 1/2-inch chambers, about true cylinder and 1/4 choke borings, the frame, locks and top lever with acanthus scroll engraving and retaining much original hardening colour, gold lined cocking indicators, 14 1/4-inch highly figured stock, 6lb 8oz., nitro proof, in its maker's leather case
S2
The maker confirms that the gun was built in 1905 and it retains much of its original finish.
Sold for £7500
|
details |
|
| 192 |
HENRY ATKIN
A 12-BORE "THE RALEIGH" MODEL SIDELOCK EJECTOR GUN, NO. 2100
28-inch barrels with 2 1/2-inch chambers, about true cylinder and 1/2 choke borings, the frame, locks and top lever with fine scroll engraving, retaining traces of original hardening colour, 14 3/4-inch figured stock, 6lb. 7oz., nitro proof
S2
Sold for £1000
|
details |
|
| 193 |
WATSON BROS.
A 12-BORE SIDELOCK NON-EJECTOR GUN, NO. 4565
28-inch sleeved barrels with 2 1/2-inch chambers, about 1/4 and full choke borings, the frame, back action bar locks and top lever with scroll engraving, 14 1/2-inch figured replacement stock, 6lb. 2oz., nitro proof, brassbound leather case with reproduction maker's label
S2
Country of Origin: UK/Date of Manufacture: 1892
Sold for £650
|
details |
|
| 194 |
ALEX MARTIN
A 12-BORE BOXLOCK EJECTOR GUN, NO. 18
26 1/2-inch barrels with 2 1/2-inch chambers, about 1/4 and full choke boring, top extension, the frame and top lever with scroll engraving, 14 1/2-inch figured stock including rubber recoil pad, slightly cast on for the left shoulder, 6lb. 5oz., nitro proof
S2
|
details |
|
| 195 |
CHARLES HELLIS & SONS LTD
A 12-BORE CROSSOVER BOXLOCK EJECTOR GUN, NO. 5283
28-inch barrels with 2 3/4-inch chambers, about 1/4 and 1/2 choke borings, the frame, side plates and top lever with bold scroll engraving and retaining virtually all of its original hardening colour, 15-inch well figured replacement stock, cast on for the left shoulder and right master eye, 6lb. 3oz., nitro re-proof, vinyl covered case with I. M. Crudgington label
S2
Sold for £500
|
details |
|
| 196 |
WALLIS BROS. & SKEMPTON LTD
A 12-BORE BOXLOCK EJECTOR GUN, NO. 8063
28-inch barrels with 2 1/2-inch chambers, about 1/4 and full choke borings, the frame and top lever with bold scroll engraving and retaining traces of original hardening colour, 14 1/2-inch figured stock, 6lb. 4oz., nitro proof
S2
Sold for £380
|
details |
|
| 197 |
WILLIAM CASHMORE
A 12-BORE BOXLOCK EJECTOR GUN, NO. 9636
30-inch barrels with 2 1/2-inch chambers, about 1/4 and 3/4 choke borings, top extension, the frame and top lever with fine scroll engraving, the maker's name signed within a scrolling banner, 14 1/4-inch well figured stock, 6lb. 8oz., nitro re-proof
S2
Sold for £500
|
details |
|
| 198 |
J. & W. TOLLEY
A 12-BORE BOXLOCK EJECTOR GUN, NO. 88301
28-inch barrels with 2 1/2-inch chambers, about improved cylinder and full choke borings, top extension, the frame and top lever with scroll engraving and retaining some original hardening colour, 15 3/4-inch figured stock including 1-inch horn extension, 6lb. 11oz., nitro re-proof
S2
|
details |
|
| 199 |
WESTLEY RICHARDS
A 12-BORE BOXLOCK EJECTOR GUN, NO. T11376
28-inch barrels with 2 1/2-inch chambers, about 1/4 and full choke borings, top extension, the frame and top lever with scroll engraving and retaining much original hardening colour, the maker's name signed within a scrolling banner, 14 3/4-inch figured stock with chequered butt plate, 6lb. 10oz., nitro proof
S2
Sold for £750
|
details |
|
| 200 |
WESTLEY RICHARDS
A 12-BORE BOXLOCK EJECTOR GUN, NO. T11711, A TWO BARREL SET
28-inch barrels with 2 3/4-inch chambers, about 1/2 and 3/4 choke borings, file-cut rib, the additional interchangeable 26-inch barrels with 2 3/4-inch chambers, about improved cylinder and 1/2 choke borings, mid extension, the frame and top lever with scroll engraving and retaining virtually all of its original hardening colour, the maker's name signed within a scrolling banner, 14 1/4-inch figured stock with semi pistol grip and leather-covered recoil pad, beaver tail fore-end, 7lb. 4oz. (with 28-inch barrels), nitro proof
S2
Sold for £1400
|
details |
|
| 201 |
JAMES KIRK
A 12-BORE BOXLOCK EJECTOR GUN, NO. 488
25-inch barrels with 2 1/2-inch chambers, about 1/4 and full choke borings, file-cut Churchill rib, mid extension, the frame and top lever with bouquet and scroll engraving, 15 1/2-inch well figured stock including 1 1/2-inch extension, 6lb. 3oz., nitro proof, bores marked, in its maker's canvas case
S2
Country of Origin: UK/Date of Manufacture: circa 1920
Sold for £220
|
details |
|
| 202 |
PARKER HALE
A 12-BORE BOXLOCK EJECTOR GUN, NO. 29318
28-inch barrels with 2 3/4-inch chambers, about 1/2 and full choke borings, the frame and top lever with scroll engraving and retaining some original hardening colour, the maker's name signed within a scrolling banner, 14 1/2-inch figured stock, 6lb. 12oz., nitro proof
S2
|
details |
|
| 203 |
COGSWELL & HARRISON
A 12-BORE "AVANT TOUT" MODEL BOXLOCK EJECTOR GUN, NO. 25513
28-inch sleeved barrels with 2 1/2-inch chambers, about 1/2 and full choke borings, crossbolt extension, the polished frame with scroll engraving, 14 1/2-inch figured stock, 6lb. 11oz., nitro proof, re-jointing recommended, top lever spring weak, in its leather leg-of-mutton case; together with a Harrington & Richardson 10-bore single barrel gun, no. AT200581 (2)
S2
Sold for £70
|
details |
|
| 204 |
CHARLES BOSWELL
A 12-BORE BOXLOCK EJECTOR GUN, NO. 13985
30-inch damascus barrels with 2 1/2-inch chambers, about improved cylinder and 1/2 choke borings, doll's head extension, the scalloped frame and gold numbered top lever with fine scroll engraving and retaining traces of oriignal hardening colour, 14 3/4-inch well figured stock including 1-inch ebonite extension, 6lb. 12oz., nitro re-proof, left barrel wall thickness below the recommended minimum, in its maker's leather case
S2
|
details |
|
| 205 |
FERLIB
A 12-BORE BOXLOCK EJECTOR GUN, NO. 32938
27 3/4-inch barrels with 2 3/4-inch chambers, about 1/4 and 3/4 choke borings, the scroll back frame and top lever with fine scroll engraving and retaining all of its original bright finish, trigger plate signed by the engraver 'A. Poli', 14 1/4-inch figured stock, 6lb. 4oz., Italian nitro proof, right barrel wall thickness marginal
S2
Sold for £800
|
details |
|
| 206 |
WEBLEY & SCOTT
A 12-BORE MODEL 700 BOXLOCK EJECTOR CROSSOVER GUN, NO. 131668
28-inch barrels with 2 3/4-inch chambers, about 1/4 and 3/4 choke borings, the frame and top lever with scroll engraving and retaining some original hardening colour, 14 1/4-inch stock cast off for the right shoulder and left master eye, 6lb. 6oz., nitro proof, top lever spring weak
S2
Sold for £480
|
details |
|
| 207 |
E. J. CHURCHILL
A 12-BORE (3-INCH) BOXLOCK EJECTOR GUN, NO. 7287
25-inch chopper-lump barrels with 3-inch chambers, about 1/4 and full choke borings, machined Churchill rib and top extension, the frame and top lever with scroll engraving and retaining some original hardening colour, the maker's name signed within a scrolling banner, rolled edge trigger guard, 15 3/4-inch figured stock including 3/4-inch extension and rubber recoil pad, 7lb. 8oz., nitro re-proof
S2
Sold for £900
|
details |
|
| 208 |
K. D. RADCLIFFE
A 12-BORE BOXLOCK EJECTOR GUN, NO. 5747
28-inch barrels with 2 1/2-inch chambers, about improved cylinder and 1/4 choke borings, the frame and top lever with scroll engraving and retaining much original hardening colour, the maker's name signed within a scrolling banner, 15-inch figured stock including rubber recoil pad, 6lb. 8oz., nitro proof, leather case with Gallyon & Son label
S2
Sold for £700
|
details |
|
| 209 |
WEBLEY & SCOTT
A FINE 12-BORE MODEL 700 BOXLOCK EJECTOR GUN, NO. 143737
28-inch barrels with 2 3/4-inch chambers, about 3/8 and 3/4 choke borings, the rib engraved with the retailer's name "S. R. Jeffery & Son Ltd, Guildford", the frame and top lever with scroll engraving and retaining virtually all of its original hardening colour, the trigger guard engraved with the retailer's number 9943, 14 1/2-inch figured stock, 6lb. 2oz., nitro proof, in its Brady canvas case with retailer's card, original hang tag, oil tin, etc
S2
The gun appears virtually unused.
Sold for £1200
|
details |
|
| 210 |
WEBLEY & SCOTT
A 12-BORE MODEL 700 BOXLOCK EJECTOR GUN, NO. 143772
26-inch barrels with 2 3/4-inch chambers, about improved cylinder and 1/2 choke borings, the rib engraved with the retailer's name "S. R. Jeffery & Son Ltd, Guildford", the frame and top lever with scroll engraving and retaining some original hardening colour, the trigger guard engraved with the retailer's number 9945, 14 3/4-inch figured stock, 6lb. 2oz., nitro proof, in its Brady canvas case
S2
Sold for £420
|
details |
|
|
|
