| 211 |
SUSSEX ARMOURY
A .22 "JACKAL" SIDE LEVER AIR RIFLE, NO. 0417
8-inch barrel with muzzle shroud, the receiver mounted with a telescopic sight, side lever and loading tap, black synthetic stock with pistol grip and dummy magazine, 14 1/2-inch pull, 7lb. 14oz.
|
details |
 |
| 212 |
BSA
A .177 LIGHT PATTERN UNDERLEVER AIR RIFLE, NO. L17133
17-inch barrel with loading tap and underlever action, 14 1/4-inch stock with semi pistol grip, rear sight adjusting screw missing, 6lb. 1oz.
|
details |
|
| 213 |
BLASER
A .300 WIN MAG BARREL, NO. R/127656
for the R8 model, the 25 1/2-inch fluted barrel threaded at the muzzle for a sound moderator, together with its associated magazine insert, new and unused
S1
|
details |
|
| 214 |
MANNLICHER
THE BARRELLED ACTION OF A 6.5MM BOLT-ACTION SPORTING RIFLE, IN THE WHITE
S1
|
details |
|
| 215 |
WESTLEY RICHARDS
THE STOCK AND ACTION ONLY OF PERCUSSION DOUBLE BARREL SPORTING GUN
the locks, hammers and breech with scroll engraving, the half length stock with steel butt plate, 13 3/4-inch pull, barrels missing, worn overall
S58
|
details |
|
| 216 |
W. W. GREENER
THE ACTION, STOCK AND FORE-END ONLY OF A 12-BORE HAMMER GUN, NO. 28754
the frame, rebounding bar locks, hammers and rotary underlever with fine scroll engraving, 14 1/4-inch figured stock with chequered butt plate
S2
|
details |
|
| 217 |
JOHN DICKSON & SON
THE ACTION, STOCK AND FORE-END ONLY OF A 12-BORE HAMMER GUN, NO. 3491
the frame, rebounding bar locks, hammers and top lever with fine scroll engraving and retaining traces of original hardening colour, 14 1/4-inch well figured stock with chequered butt plate
S2
The maker confirms that the gun was built in 1878.
|
details |
|
| 218 |
LINCOLN JEFFRIES
THE ACTION, STOCK AND FORE-END ONLY OF A .410 BOXLOCK NON-EJECTOR GUN, NO. 3591
the frame and top lever with scroll engraving and retaining traces of hardening colour, 14 1/4-inch figured stock with semi pistol grip, canvas case with Army & Navy label
S2
|
details |
|
| 219 |
WILLIAM FORD
THE ACTION, STOCK AND FORE-END ONLY OF A 20-BORE BOXLOCK NON-EJECTOR GUN, NO. 15954
the frame and top lever with scroll engraving and retaining some original hardening colour, 14 1/4-inch well figured stock, in its maker's canvas case
S2
|
details |
|
| 220 |
JOSEPH LANG & SON
A MATCHED TRIO OF 12-BORE SIDELOCK EJECTOR GUNS, NOS. 15031, 15032 AND 15277
28-inch barrels, No.1 gun sleeved with 2 3/4-inch chambers about 1/2 choke borings, No.2 gun with replacement chopper-lump barrels by the maker with 2 1/2-inch chambers about 1/4 and 1/2 choke borings, No.3 gun with 2 1/2-inch chambers about 1/4 and 1/2 choke borings, the frames, hand detachable locks and gold numbered top levers with fine bouquet and scroll engraving, gold lined cocking indicators, No.1 gun with 14 1/4-inch well figured stock including 1/2-inch extension, No.2 gun with 15-inch well figured stock including 1 1/4-inch extension, No.3 gun with 15 3/4-inch figured stock including 1-inch extension, 6lb. 11oz., 6lb. 11oz. and 6lb. 9oz. respectively, nitro proof, in three individual canvas gun cases
S2
The maker confirms that the pair was built in 1911 and the No.3 gun was built to match in 1920.
|
details |
|
| 221 |
LUIGI FRANCHI
A PAIR OF 12-BORE SIDELOCK EJECTOR GUNS, NOS. 9096/7
27 1/2-inch barrels with 2 3/4-inch chambers, about full choke borings, mid extensions, file cut ribs, the rounded frames, numbered top levers and hand detachable locks with fine scroll engraving surrounding bouquets and ribbons, articulated front triggers, 14 1/4-inch highly figured stocks with ribbed butt plates, 6lb. 12oz., nitro proof
S2
|
details |
|
| 222 |
HUSSEY LTD.
A PAIR OF 12-BORE SIDELOCK EJECTOR GUNS, NOS. 14426/7
27-inch replacement barrels by the maker with 2 3/4-inch chambers, about 1/4 and full choke borings, the frames, locks and gold numbered top levers with fine bouquet and scroll engraving, 14 3/4-inch highly figured stocks, 6lb. 10oz., nitro proof, in their maker's oak and leather case, canvas outer cover
S2
The maker confirms that the guns were built in 1908 for the Hon. R Grosvenor.
|
details |
|
| 223 |
BOSS & CO.
A PAIR OF 12-BORE ASSISTED-OPENING SINGLE TRIGGER SIDELOCK EJECTOR GUNS, NOS. 4441/2
30-inch barrels with 2 1/2-inch chambers, about 1/4 and 3/4 choke borings, the frames, locks and gold numbered top levers with fine bouquet and scroll engraving and retaining some original hardening colour, the maker's name signed within a scrolling banner, gold lined cocking indicators, 14 1/2-inch highly figured stocks, 6lb. 11oz., nitro re-proof, barrel wall thickness marginal, in their brassbound oak and leather case
S2
The maker confirms that the guns were built in 1896.
|
details |
|
| 224 |
UGARTECHEA
A PAIR OF 12-BORE SIDELOCK EJECTOR GUNS, NOS. 168797/8
28-inch chopper-lump barrels with 2 3/4-inch chambers, about 1/4 and 1/2 choke borings, mid extensions, the frames, locks and gold numbered top levers with fine bouquet and scroll engraving and retaining much original hardening colour, articulated front triggers, rolled edge trigger guards, 15-inch well figured stocks, 7lb. 5oz., Spanish nitro proof, fore-end tip of the No.2 gun a replacement, in their individual leather cases
S2
|
details |
|
| 225 |
BOSS & CO.
A MATCHED PAIR OF 12-BORE SINGLE TRIGGER ASSISTED OPENING SIDELOCK EJECTOR GUNS, NOS. 6951 AND 6997
28-inch replacement chopper-lump barrels by the maker with 2 3/4-inch chambers, about improved cylinder and 1/4 choke borings, the frames, locks and gold numbered top levers with fine bouquet and scroll engraving and retaining some original hardening colour, gold lined cocking indicators, 14 1/2-inch highly figured replacement stocks, 6lb. 6oz., nitro proof, in their maker's brassbound oak and leather case
S2
The maker confirms that the guns were built in 1923 and that the No.2 gun was built to match a short while later. They were re-barrelled by the maker and recently re-stocked to the highest standard.
|
details |
|
| 226 |
CHARLES OSBOURNE & CO.
A PAIR OF 12-BORE SIDELOCK EJECTOR GUNS, NOS. 75450/1
30-inch barrels with 2 1/2-inch chambers, about 3/8 and 3/4 choke borings, doll's head extensions, the frames, locks and gold numbered top levers with bouquet and scroll engraving, lined cocking indicators, 15 1/2-inch figured stock including 1 1/2-inch extensions, No.2 gun cracked and repaired at the head, 6lb. 14oz., nitro re-proof, rejointing recommended
S2
|
details |
|
| 227 |
BOSS & CO.
A PAIR OF 12-BORE SINGLE TRIGGER ROUND BODY SIDELOCK EJECTOR GUNS, NOS. 5751/2
No.1 gun with 29-inch replacement chopper-lump barrels by the maker, with 2 3/4-inch chambers about 1/4 and 1/2 choke borings, No.2 gun with 29-inch barrels with 2 1/2-inch chambers, about improved cylinder and 1/4 choke borings, the rounded frames, locks and gold numbered top levers with fine bouquet and scroll engraving and retaining traces of original hardening colour, the maker's name signed within a scrolling banner, gold lined cocking indicators, rolled edge trigger guard, 14-inch highly figured stocks including rubber recoil pads, 6lb. 10oz. and 6lb. 6oz. respectively, nitro proof, No.2 gun barrel wall thickness below recommended minimum, in their maker's brassbound leather case
S2
The maker confirms that the guns were built in 1909 and that the replacement barrels were fitted in 1996.
|
details |
|
| 228 |
J. PURDEY & SONS
A PAIR OF 12-BORE SELF-OPENING SIDELOCK EJECTOR GUNS, NOS. 27743/4
26-inch chopper-lump barrels with 2 1/2-inch chambers, about 1/4 and 1/2 choke borings, the frames, locks and numbered top levers with fine bouquet and scroll engraving and retaining most of their original hardening colour, lined cocking indicators, 14 1/4-inch well figured stocks including rubber recoil pads, 6lb. 7oz., nitro proof, in their maker's lightweight canvas motor case
S2
The maker confirms that the guns were built in 1971 for the Duke of Fife.
|
details |
|
| 229 |
BOSS & CO.
A 12-BORE SINGLE TRIGGER SIDELOCK EJECTOR GUN, NO. 6552, A TWO BARREL SET
28-inch original maker's chopper-lump barrels with 2 1/2-inch chambers, about improved cylinder and 1/4 choke borings, the additional 28-inch interchangeable maker's chopper-lump barrels with 2 1/2-inch chambers, about improved cylinder borings, the frame, locks and gold numbered top lever with fine bouquet and scroll engraving, the maker's name signed within a scrolling banner, gold lined cocking indicators, rolled edge trigger guard, 15-inch well figured replacement stock including rubber recoil pad, 6lb 12oz. and 6lb. 15oz. respectively, nitro proof, in its maker's brassbound oak and leather case, the lid impressed "The Earl of Powis"
S2
The maker confirms that the gun was built in 1916 and that the additional interchangeable barrels were fitted in 1980.
|
details |
|
| 230 |
HOLLAND & HOLLAND
A 12-BORE "DOMINION" MODEL BACKLOCK EJECTOR GUN, NO. 23739
28-inch barrels with 2 1/2-inch chambers, possibly shortened, about improved cylinder and 1/4 choke borings, the frame, backlocks and top lever with border engraving and retaining some original hardening colour, lined cocking indicators, the lock plates signed "H&H", 14 1/4-inch figured stock with ribbed butt plate, 6lb. 6oz., nitro proof, in its maker's canvas case
S2
|
details |
|
| 231 |
HOLLAND & HOLLAND
A 12-BORE "DOMINION" BACKLOCK NON-EJECTOR GUN, NO. 21673
30-inch barrels with 2 1/2-inch chambers, about improved cylinder and 1/4 choke borings, the round frame, backlocks and top lever with border engraving, 15-inch well figured stock with ribbed butt plate, 6lb. 10oz., nitro proof
S2
|
details |
|
| 232 |
W. W. GREENER
A 12-BORE SIDELOCK EJECTOR GUN, NO. 64570
28-inch Whitworth steel barrels with 2 1/2-inch chambers, about 1/2 and full choke borings, machined rib with crossbolt extension, the frame, locks and top lever profusely engraved with fine scrollwork surrounding highly detailed scenes of game in landscapes, gold lined cocking indicators, 14 1/2-inch figured stock with sling swivels, 6lb. 7oz., nitro re-proof
S2
|
details |
|
| 233 |
HENRY ATKIN
A 12-BORE SIDELOCK EJECTOR GUN, NO. 1444
28-inch barrels with 2 1/2-inch chambers, about 1/2 and 7/8 choke borings, the frame, locks and top lever with border engraving, 14 1/2-inch figured replacement stock, 6lb. 7oz., nitro proof
S2
|
details |
|
| 234 |
CHARLES LANCASTER
A 12-BORE BACKLOCK EJECTOR GUN, NO. 13395
28-inch sleeved barrels with 2 1/2-inch chambers, about improved cylinder and 1/2 choke borings, the frame, backlocks and top lever with fine scroll engraving and retaining some original hardening colour, the maker's name signed within a scrolling banner, 15 1/4-inch highly figured stock including 3/4-inch extension, 6lb. 11oz., nitro proof, leather case
S2
The gun was sleeved to the highest standard in 1988.
|
details |
|
| 235 |
WILLIAM EVANS
A 12-BORE SIDELOCK EJECTOR GUN, NO. 13244
28-inch barrels with 2 1/2-inch chambers, about 1/2 choke borings, doll's head extension, the frame, locks and gold numbered top lever with bold foliate scroll engraving and retaining traces of original hardening colour, 16 1/4-inch well figured crossover stock, cast for the right shoulder and left master eye, including 2-inch extension, 6lb. 9oz., nitro proof, right bore marked, canvas case with maker's label
S2
|
details |
|
| 236 |
WILLIAM POWELL & SON
A 12-BORE SIDELOCK EJECTOR GUN, NO. 10842
29-inch barrels with 2 1/2-inch chambers, about improved cylinder and 1/2 choke borings, doll's head extension, the frame, locks and gold numbered top lever with bouquet and scroll engraving, 14 1/4-inch well figured stock, 6lb. 8oz., nitro proof, leather leg-of-mutton case
S2
|
details |
|
| 237 |
ARRIETA
A 12-BORE "CROWN SABEL" MODEL SIDELOCK EJECTOR GUN, NO. 31722
27-inch chopper-lump barrels with 2 3/4-inch chambers, about 1/4 and 1/2 choke borings, the frame, hand detachable locks and top lever with border engraving and crown motifs, articulated front trigger, 14 3/4-inch figured stock, 6lb. 8oz., Spanish nitro proof
S2
|
details |
|
| 238 |
G. & S. HOLLOWAY
A 12-BORE SIDELOCK EJECTOR GUN, NO. 23007
28-inch barrels with 2 1/2-inch chambers, about 1/4 and 1/2 choke borings, the frame, locks and top lever with fine bouquet and scroll engraving, the action base engraved "J. L. Taylor, Borrowash, Derby", 15 1/2-inch well figured stock including 1 1/2-inch extension, 6lb. 10oz., nitro proof
S2
|
details |
|
| 239 |
CHARLES LANCASTER
A 12-BORE BACKLOCK EJECTOR GUN, NO. 6752
28-inch sleeved barrels with 2 1/2-inch chambers, about 1/4 and 1/2 choke borings, the frame, backlocks and gold numbered top lever with fine scroll engraving, 14-inch figured replacement stock, 6lb. 10oz., nitro re-proof, top rib loose, canvas case with W. J. Jeffery label
S2
|
details |
|
| 240 |
COGSWELL & HARRISON
A 12-BORE "EXTRA QUALITY VICTOR" MODEL SIDELOCK EJECTOR GUN, NO. 41779
30-inch Argos steel barrels with 2 1/2-inch chambers, about improved cylinder and 1/4 choke borings, the frame, locks and gold numbered top lever with fine bouquet and scroll engraving and retaining some original hardening colour, gold lined cocking indicators, 15-inch highly figured stock including 1/2-inch extension, cast on for the left shoulder, 6lb. 10oz., nitro proof, in its brassbound leather case with C. B. Vaughan label
S2
The gun was built with right handed specification and the stock should easily return to its original cast.
|
details |
|
|
|
