| 271 |
W. W. GREENER
AN 8-BORE BOXLOCK EJECTOR GUN, NO. 61510
32-inch barrels with 3 1/2-inch chambers, about 1/2 and full choke borings, file-cut flat top rib and crossbolt extension, the heavy bolstered scroll backed frame and top lever retaining much renewed hardening colour, non-automatic safety catch, 15-inch highly figured stock with semi pistol grip and rubber recoil pad, 11lb. 4oz., nitro re-proof, in its maker's leather case
S58
|
details |
 |
| 272 |
W. & C. SCOTT
A FINE 10-BORE SIDELOCK NON-EJECTOR "THE EXCELLENTIA" GUN, NO. 36167, A TWO BARREL SET
30-inch damascus barrels with 2 7/8-inch chambers, about 3/4 choke borings, top extension, the interchangeable 30-inch 12-bore barrels with 2 1/2-inch chambers, about 3/4 choke borings, top extension, the ribs signed by the maker and with inlaid gold stars, the rounded frame, backlocks and top lever engraved with scrollwork and oak leaf decoration around scenes of waterfowl in realistic landscapes, patent crystal indicators, gold washed lockwork, retaining much of its renewed hardening colour, 14 1/2-inch figured stock, 10lb. 1oz., nitro re-proof, in its best quality modern oak and leather case with canvas outer cover and fitted with Mike Marsh tools and accessories
S2
A quantity of cartridges will be made available to the purchaser of this lot.
|
details |
|
| 273 |
J. BLANCH & SON
AN 8-BORE SIDELOCK NON-EJECTOR GUN, NO. 10348
36-inch damascus barrels with 3 1/2-inch chambers, about improved cylinder and full choke borings, doll's head extension, the frame, locks and top lever with border and scroll decoration, retaining much hardening colour, possibly renewed, gold lined cocking indicators, 14-inch well figured stock including rubber recoil pad, cracked and repaired at the hand, sling swivels, 14lb., nitro re-proof, in its canvas case with reproduction maker's label, together with a set of period reloading tools
S58
A large quantity of cartridges will be made available to the purchaser.
|
details |
|
| 274 |
GEORGE GIBBS
A SCARCE 8-BORE GIBBS & PITT PATENT LEVER COCKING GUN, NO. E126
33-inch damascus barrels with 3 1/4-inch chambers, about extra full choke borings, the rounded frame and push-forward underlever with border engraving, the top surface engraved "Gibbs & Pitt Patent No. 180, Bristol", bolted side safety, 14-inch figured stock with pistol grip and ribbed butt plate, 10lb. 7oz., nitro re-proof, bores marked
S58
|
details |
|
| 275 |
A 12-BORE TOP LEVER HAMMER GUN
28-inch replacement barrels by C. H. Smith & Sons with 2 1/2-inch chambers, about full choke borings, crossbolt extension, the frame, rebounding bar locks, hammers and top lever with scroll engraving, 14 1/4-inch figured stock, 6lb. 6oz., nitro proof
S2
Sold for £120
|
details |
|
| 276 |
MASU
A 12-BORE HAMMER GUN, NO. 3714
30-inch damascus barrels with 2 1/2-inch chambers, about true cylinder borings, the frame, non rebounding back locks, hammers and rotary underlever with fine scroll engraving and retaining traces of original hardening colour, 14 3/4-inch figured stock including 1/2-inch extension, 7lb., black powder proof, fore-end missing, in its maker's canvas case with lift-out tray
S2
Sold for £200
|
details |
|
| 277 |
PEDERSOLI
A 12-BORE REPRODUCTION PERCUSSION GUN, NO. 7272
28 1/2-inch browned barrels with machined rib, about 1/4 and 1/2 choke borings, the frame, locks and hammers with scroll decoration and retaining much original hardening colour, half length stock with steel furniture, 14 1/4-inch pull, 5lb. 14oz., Italian black powder proof
S2
Sold for £10
|
details |
|
| 278 |
F. GATES
A 12-BORE HAMMER GUN, NO. 592
28-inch sleeved barrels with 2 1/2-inch chambers, about 1/4 and 1/2 choke borings, the frame, non-rebounding bar locks, hammers and rotary underlever with fine scroll engraving, 14 1/4-inch highly figured stock with steel butt plate, 6lb. 9oz., nitro proof
S2
Sold for £350
|
details |
|
| 279 |
STEPHEN GRANT
A 12-BORE SIDE LEVER HAMMER GUN, NO. 4184
31-inch damascus barrels with 2 1/2-inch chambers, about true cylinder and 1/2 choke borings, the rounded frame, rebounding backlocks, hammers and side lever with fine scroll engraving, 14 1/4-inch figured stock with engraved heel and toe plates, 6lb. 13oz., nitro re-proof, bores pitted, in its maker's oak and leather case
S2
Sold for £2000
|
details |
|
| 280 |
J. PURDEY & SON
A 12-BORE BAR-IN-WOOD TOP LEVER HAMMER GUN, NO. 10042
30-inch damascus barrels with 2 /2-inch chambers, about 1/2 and 3/4 choke borings, the additional 30-inch replacement steel barrels by Clive Lemon Gunmaker with 2 1/2-inch chambers, about improved cylinder and 1/4 choke borings, the frame, rebounding bar lock, hammers and top lever with bouquet and scroll engraving, 14 1/2-inch well figured stock including 1/2-inch ebonite extension, 6lb. 10oz., nitro proof, the original damascus barrels black powder proof (1868 Rules), bores pitted, in a brassbound leather double gun case
S2
The maker confirms that the gun was built 1877 as the No.2 gun of a pair of top lever bar-in-wood guns. The replacement barrels were fitted by Clive Lemon in 1991.
Sold for £4200
|
details |
|
| 281 |
ARMY & NAVY
A 12-BORE TOP LEVER HAMMER GUN, NO. 24588
30-inch barrels with 2 1/2-inch chambers, about true cylinder and 3/4 choke borings, doll's head extension, the rounded frame, rebounding back locks, hammers and top lever with border engraving, 14 1/2-inch figured stock, 6lb. 8oz., nitro re-proof, right bore marked, canvas case with reproduction label
S2
|
details |
|
| 282 |
W. W. GREENER
A 28-BORE HAMMER GUN, NO. 64918
27-inch barrels with 2 3/4-inch chambers, about 1/2 and full choke borings, crossbolt extension, the rounded frame rebounding backlocks, hammers and top lever with scroll engraving, 14-inch figured stock with semi pistol grip, 4lb. 12oz., recent nitro re-proof
S2
Sold for £2000
|
details |
|
| 283 |
J. BLANCH & SON
A 12-BORE PINFIRE HAMMER GUN, NO. 4254
30-inch damascus barrels with 2 1/2-inch chambers, about true cylinder borings, the rounded frame, non rebounding backlocks, hammers and rotary underlever with fine scroll engraving and retaining traces of original hardening colour, the maker's name signed within a scrolling banner, 14 1/4-inch figured stock with engraved heel and toe plates, 6lb. 14oz., black powder proof, bores marked
S58
Sold for £550
|
details |
|
| 284 |
A 12-BORE PERCUSSION SPORTING GUN
31-inch damascus barrels, the bar locks and hammers with scroll engraving, the half length stock with steel furniture, 14 1/4-inch pull, 7lb., black powder proof, worn overall
S58
Sold for £80
|
details |
|
| 285 |
D. EGG
A 12-BORE PERCUSSION SPORTING GUN
28-inch damascus barrels, the engraved breeches with platinum lined plugs, top rib detached, ramrod, the non-rebounding backlocks, hammers and frame with scroll engraving, the half length stock with engraved steel furniture, 14 1/2-inch pull, 5lb. 9oz., black powder proof, in its case with powder flask and shot horn
S2
Sold for £700
|
details |
|
| 286 |
AN ENGLISH .410 SINGLE BARREL HAMMER GUN
29-inch octagonal to round barrel with 3-inch chamber, about 1/4 choke boring, the frame, side lever and central hammer retaining traces of original hardening colour, 14 3/4-inch stock including 3/4-inch extension, 3lb. 13oz., recent nitro re-proof; together with a BSA .22 "Meteor" air rifle, no. TH34259 (2)
S2
Sold for £40
|
details |
|
| 287 |
STEPHEN GRANT
A 12-BORE SIDE LEVER HAMMER GUN, NO. 4367
30-inch damascus barrels with 2 1/2-inch chambers, about true cylinder borings, the rounded frame, rebounding backlocks, hammers and side lever with fine scroll engraving and retaining much of its renewed hardening colour, 14 1/4-inch well figured stock with engraved heel and toe plates, 6lb. 14oz., black powder proof with proof exemption certificate, bores pitted and rivelled, right lock rebound defective
S2
The maker confirms that the gun was built in 1877.
Sold for £800
|
details |
|
| 288 |
STEPHEN GRANT
A 12-BORE HAMMER GUN, NO. 4683
30-inch barrels with 2 1/2-inch chambers, about improved cylinder and 1/4 choke borings, the frame, rebounding backlocks, hammers and rotary underlever with fine scroll engraving and retaining traces of original hardening colour, 14 1/4-inch well figured stock with steel butt plate, 7lb., black powder proof, bores pitted and dented
S2
The maker confirms that the gun was built in 1879 as the No.2 gun of a pair.
Sold for £800
|
details |
|
| 289 |
STEPHEN GRANT
A 12-BORE SIDE LEVER HAMMER GUN, NO. 4068
31-inch damascus barrels with 2 1/2-inch chambers, about true cylinder borings, broad flat rib, the rounded frame, rebounding backlocks, hammers and side lever with fine scroll engraving, 14 1/4-inch highly figured stock, 7lb. 1oz., black powder proof, in its maker's oak and leather case, right bore marked
S2
The maker confirms that the gun was built in 1876.
|
details |
|
| 290 |
STEPHEN GRANT
A 12-BORE HAMMER GUN, NO. 4180
30-inch damascus barrels with 2 1/2-inch chambers, about 1/2 choke borings, broad flat rib, the rounded frame, rebounding backlocks, hammers and rotary underlever with fine scroll engraving and retaining faint traces of original hardening colour, 14 1/4-inch highly figured stock with engraved steel butt plate, 7lb. 2oz., black powder proof, bores slightly dented
S2
Sold for £1900
|
details |
|
| 291 |
C. G. BONEHILL
A 16-BORE TOP LEVER HAMMER GUN, NO. 144142
30-inch barrels with 2 3/4-inch chambers, about true cylinder and full choke borings, the frame, rebounding backlocks, hammers and top lever with scroll engraving, 14 3/4-inch figured replacement stock, 6lb. 6oz., nitro proof, left bore diameter marginal
S2
Sold for £200
|
details |
|
| 292 |
W. R. PAPE
A 12-BORE TOP LEVER HAMMER GUN, NO. 2803
30-inch damascus barrels with 2 1/2-inch chambers, about true cylinder borings, mid extension, the frame, rebounding backlocks, hammers and top lever with scroll engraving, 14-inch figured stock with engraved heel and toe plates, 7lb. 2oz., black powder proof (1868 Rules), bores pitted, top lever spring broken, worn overall
S2
Sold for £100
|
details |
|
| 293 |
T. BLAND & SONS
A 10-BORE HAMMER GUN, NO. 11315
32-inch damascus barrels with 3 1/4-inch chambers, about 3/4 choke borings, the rounded frame, rebounding back locks, hammers and rotary underlever with border engraving, 14 1/4-inch figured stock with ribbed butt plate, 8lb. 2oz., nitro re-proof
S2
Sold for £400
|
details |
|
| 294 |
G. E. LEWIS
A 20-BORE TOP LEVER HAMMER GUN, NO. 8962, CONVERTED FROM A RIFLE
26-inch barrels with 2 1/2-inch chambers, about 1/2 choke borings, file-cut rib with top extension, the frame, rebounding backlocks, hammers and top lever with fine scroll engraving and retaining faint traces of original hardening colour, 14 1/4-inch figured stock with pistol grip, cap and steel butt plate, sling eyes, 7lb. 4oz., nitro proof
S2
|
details |
|
| 295 |
HENRY ATKIN
A .410 SINGLE BARREL HAMMER GUN, NO. 296, CONVERTED FROM A ROOK RIFLE
28-inch octagonal to round barrel with 2 1/2-inch chambers, about 3/4 choke boring, automatic ejector, the rounded frame, rebounding back lock, hammer and top lever with scroll engraving and retaining much renewed finish, 13 1/4-inch stock with pistol grip, 4lb. 4oz., nitro proof
S2
|
details |
|
| 296 |
MARTIN
A 16-BORE PERCUSSION SPORTING GUN
30-inch damascus barrels with gold lined breeches and platinum plugs, the rib engraved "Paisley", rosewood ramrod, the non-rebounding locks and hammers engraved with running hares within borders, retaining traces of original hardening colour, the half length stock with engraved furniture and pineapple finial, engraved steel butt plate, 14 1/4-inch pull, 7lb., London black powder proof
S58
Sold for £600
|
details |
|
| 297 |
E. M. REILLY & CO.
A 12-BORE HAMMER GUN, NO. 28001
29 3/4-inch damascus barrels with 2 3/4-inch chambers, about improved cylinder and 3/4 choke borings, the rounded frame, rebounding back locks, hammers and rotary underlever with border engraving and retaining traces of original hardening colour, the maker's name signed within a scrolling banner, 14-inch figured stock with steel butt plate, 6lb. 15oz., nitro re-proof
S2
Sold for £280
|
details |
|
| 298 |
J. G. STYLES & CO.
A 12-BORE TOP LEVER HAMMER GUN, NO. 1
30-inch damascus barrels with 2 1/2-inch chambers, about improved cylinder boring, the frame, rebounding bar lock, hammers and top lever with border engraving, around scenes of dog and game, 13 1/2-inch figured stock with semi pistol grip, cracked and repaired at the hand, 6lb. 9oz., nitro re-proof
S2
Sold for £80
|
details |
|
| 299 |
GEORGE GIBBS
A 12-BORE TOP LEVER HAMMER GUN, NO. B1751
30-inch barrels with 2 1/2-inch chambers, about true cylinder and 3/4 choke borings, the rounded frame, rebounding backlocks, hammers and top lever with scroll engraving, 14-inch figured stock with ribbed butt plate, 6lb. 10oz., nitro proof, canvas case
S2
Sold for £320
|
details |
|
| 300 |
HARKOM
A 12-BORE PINFIRE GUN
30-inch damascus barrel with 2 1/2-inch chambers, about true cylinder boring, the rib signed "Harkom, Edinburgh", the rounded frame, non-rebounding back locks, hammers and rotary underlever with scroll engraving, 14 1/4-inch figured stock with steel butt plate, 7lb. 3oz., black powder proof
S58
Sold for £480
|
details |
|
|
|
